ISO 19880-1:2020

مواصفة قياسية دولية   الإصدار الحالي · اعتمدت بتاريخ ٠٤ مارس ٢٠٢٠

Gaseous hydrogen — Fuelling stations — Part 1: General requirements

ملفات الوثيقة ISO 19880-1:2020

الإنجليزية 173 صفحات
الإصدار الحالي
257.28 USD

مجال الوثيقة ISO 19880-1:2020

This document defines the minimum design, installation, commissioning, operation, inspection and maintenance requirements, for the safety, and, where appropriate, for the performance of public and non-public fuelling stations that dispense gaseous hydrogen to light duty road vehicles (e.g. fuel cell electric vehicles).

This document is not applicable to the dispensing of cryogenic hydrogen, or hydrogen to metal hydride applications.

Since this document is intended to provide minimum requirements for fuelling stations, manufacturers can take additional safety precautions as determined by a risk management methodology to address potential safety risks of specific designs and applications.

While this document is targeted for the fuelling of light duty hydrogen road vehicles, requirements and guidance for fuelling medium and heavy duty road vehicles (e.g. buses, trucks) are also covered.

Many of the generic requirements within this document are applicable to fuelling stations for other hydrogen applications, including but not limited to the following:

— fuelling stations for motorcycles, fork-lift trucks, trams, trains, fluvial and marine applications;

— fuelling stations with indoor dispensing;

— residential applications to fuel land vehicles;

— mobile fuelling stations; and

— non-public demonstration fuelling stations.

However, further specific requirements that can be necessary for the safe operation of such fuelling stations are not addressed in this document.

This document provides requirements for and guidance on the following elements of a fuelling station (see Figure 1 and Figure 2):

— hydrogen production/delivery system:

  • — delivery of hydrogen by pipeline, trucked in gaseous and/or liquid hydrogen, or metal hydride storage trailers;
  • — on-site hydrogen generators using water electrolysis process or hydrogen generators using fuel processing technologies;
  • — liquid hydrogen storage;
  • — hydrogen purification systems, as applicable;

— compression:

  • — gaseous hydrogen compression;
  • — pumps and vaporizers;

— gaseous hydrogen buffer storage;

— pre-cooling device;

— gaseous hydrogen dispensing systems.

الأكثر مبيعاً

GSO 150-2:2013
 
مواصفة قياسية خليجية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 150-2:2020
GSO 150-2:2013 
لائحة فنية يمنية
فترات صلاحية المنتجات الغذائية - الجزء الثاني : فترات الصلاحية الاختيارية
YSMO GSO 2055-1:2020
GSO 2055-1:2015 
مواصفة قياسية يمنية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال
GSO 2055-1:2015
 
لائحة فنية خليجية
الأغذية الحلال – الجزء الأول : الاشتراطات العامة للأغذية الحلال

اعتمدت مؤخراً

ISO 4211-1:2025
 
مواصفة قياسية دولية
Furniture — Tests for surface finishes — Part 1: Assessment of resistance to cold liquids
ISO 11843-7:2025
 
مواصفة قياسية دولية
Capability of detection — Part 7: Methodology based on stochastic properties of instrumental noise
ISO 18750:2025
 
مواصفة قياسية دولية
Intelligent transport systems — Local dynamic map
ISO 4076:2025
 
مواصفة قياسية دولية
Polyphenylsulfone (PPSU) — Effect of time and temperature on expected strength